Manuals / Brands / Computer Equipment / Computer Hardware / Asus / Computer Equipment / Computer Hardware

Asus K8V Adjusting the volume settings, Close, Advanced, AC3 SPDIF, PCM SPDIF, Volume Control, Chapter 5: Software support, Advanced Controls for Volume Control

1 144

Download 144 pages, 4.02 Mb

Adjusting the volume settings

1.After rebooting the system, click on the volume control icon on the taskbar (lower right corner of your desktop) to display the Volume Control panel.

Volume control icon

2.If you installed an S/PDIF module, click on the Volume Control Advanced button from the Volume Control panel. The Advanced Controls for Volume Control window appears.

To achieve 6-channel audio capability when playing DVDs, check the boxes opposite AC3 SPDIF and PCM SPDIF. Click Close.

You do not need to do step 2 if you did not install an S/PDIF module.

5-16	Chapter 5: Software support

Contents

Page E1375 First Edition August Chapter 1: Product introduction Chapter 2: Hardware information Chapter 3: Powering up Chapter 4: BIOS setup Chapter 5: Software support Federal Communications Commission Statement •This device may not cause harmful interference, and •Reorient or relocate the receiving antenna •Increase the separation between the equipment and receiver •Consult the dealer or an experienced radio/TV technician for help Electrical safety Operation safety How this guide is organized Conventions used in this guide Where to find more information Technical Support Page Page Product introduction Page Thank you for buying the ASUS® K8V Deluxe motherboard Check your K8V Deluxe package for the following items ASUS K8V Deluxe motherboard S/PDIF out module ASUS support CD 1.3.1 Product highlights Latest processor technology HyperTransport™ Technology Serial ATA solution Dual SATA RAID ASUS Wi-Fislot C.P.R. (CPU Parameter Recall) AI NET solution AI BIOS solution ASUS Q-Fantechnology ASUS POST Reporter CrashFree BIOS ASUS MyLogo2™ ASUS Multi-languageBIOS IEEE 1394 support 1.3.2 Value-addedsolutions Temperature, fan, and voltage monitoring ASUS update 1.4.1 Major components Page 1.4.2 Core specifications Super I/O controller SouthBridge controller 2-channel RAID controller COM2 connector Parallel port IEEE1394 port RJ-45 port Line In jack Hardware information Page 2.1.1 Placement direction 2.1.2 Screw holes Chapter 2: Hardware information 1.Unplug the power cord from the wall socket before touching any component 3.Hold components by the edges to avoid touching the ICs on them 2.4.1 Overview 2.4.2 Installing the CPU 4.Carefully insert the CPU into the socket until it fits in place 2.4.3 Installing the heatsink and fan 2. Attach one end of the retention bracket to the retention module base 2.4.4 Connecting the CPU fan cable 2.4.5 CPU Heatsink and Fan Qualified Vendor List 2.5.1 Overview Notes on DDR technology 2.5.2 Memory configurations Important notes on memory configurations Table 1 Recommended memory configurations Table 1 Recommended memory configurations (continued) Table 1 DDR400 Qualified Vendor List (QVL) 2.5.3 Installing a DIMM 2.5.4 Removing a DIMM 2.6.1 Installing an expansion card 2.5.2 Configuring an expansion card Standard Interrupt Assignments IRQ assignments for this motherboard 2.6.3 PCI slots 2.6.4 AGP slot 2.6.5 Wi-Fislot 1.Clear RTC RAM (CLRTC) To erase the RTC RAM: 1.Turn OFF the computer and unplug the power cord 2.Remove the onboard battery Move the jumper cap from pins 2.USB device wake-up (3-pinUSBPWR12, USBPWR34, USBPWR56, USBPWR78) 3.Keyboard power (3-pinKBPWR) 1.Floppy disk drive connector (34-1pin FLOPPY) 2.IDE connectors (40-1pin PRI_IDE, SEC_IDE) 3.Serial ATA RAID connectors (7-pinSATA1, SATA2, SEC_SATA, PRI_SATA) Important notes on Serial ATA solution: The Promise •Install Windows® XP™ Service Pack 1 when using Serial ATA 4.RAID ATA/133/100/66/33 connector (40-1pin PRI_RAID) Important notes on the RAID feature: The RAID/SATA controller chipset does not support ATAPI devices such as •RAID feature only supported in Microsoft Operating Systems 5.CPU, Power and Chassis Fan Connectors (3-pinCPU_FAN, CHA_FAN, PWR_FAN) 6. Serial Port 2 connector (10-1pin COM2) 7.ATX power connectors (20-pinATXPWR, 4-pinATX12V) 8.USB headers (10-1pin USB56, USB78) 1394 cable 9.Internal audio connectors (4-pinCD, AUX) 10.IEEE 1394 connectors (10-1pin IE1394_1(Orange)) 11.Front panel audio connector (10-1pin FP_AUDIO) 12.Digital Audio connector (4-1pin SPDIF_OUT) 13.System panel connector (20-pinPANEL) This connector accommodates several system front panel functions •System Power LED Lead (3-1pin PLED) •System Warning Speaker Lead (4-pinSPKR) •Reset Switch Lead (2-pinRESET) Powering up Page 1.After making all the connections, replace the system case cover 2.Be sure that all switches are off 5.Turn on the devices in the following order: a.Monitor b.External SCSI devices (starting with the last device on the chain) POST Message Action Chapter 3: Powering up Page Using the OS shut down function Using the dual function power switch BIOS setup Managing and updating your BIOS 4.1.1 Creating a bootable floppy disk 4.1.2 Using AFUDOS to update the BIOS afudos /i<filename afudos The screen displays the status of the update process 5. Reboot the system from the hard disk Chapter 4: BIOS Setup 4.1.3 Using AFUDOS to copy BIOS from PC 4.1.4 Using ASUS EZ Flash to update the BIOS To update the BIOS using ASUS EZ Flash: 4.1.5 Recovering the BIOS with CrashFree BIOS To recover the BIOS from a floppy disk: To recover the BIOS from the support CD: Page BIOS menu screen 4.2.2 Menu bar 4.2.3 Navigation keys 4.2.4 Menu items 4.2.5 Sub-menuitems 4.2.6 Configuration fields 4.2.7 Pop-upwindow 4.2.8 Scroll bar 4.3.1 System Time [xx:xx:xxxx] 4.3.2 System Date [Day xx/xx/xxxx] 4.3.3 Legacy Diskette A [1.44M, 3.5 in.] 4.3.4 Language [English] 4.3.5 Primary and Secondary IDE Master/Slave 4.3.6 System Information AMI BIOS System Memory 4.4.1 CPU Configuration 4.4.1.1HyperTransport Configuration HT Tristate Enable [Enabled] CRC Flood Enable [Disabled] HT Frequency [800 MHz] HT DATA Width (Upstream) [16 BIT] 4.4.1.2Memory Configuration This item sets the CAS Latency Configuration options: [Auto] [2.0] [3.0] [2.5] This item sets the TRC This item sets the TRFC This item sets the TRCD Master ECC Enable DRAM ECC Enable Memory CLK [ 266MHz] CAS Latency [2.5] TRCD [ 3 CLK] TRAS [6 CLK] TRP [ 3 CLK] 4.4.2 Chipset 4.4.2.1AGP Bridge Configuration 4.4.2.2SouthBridge Configuration 4.4.2.3USB Configuration 4.4.3 Onboard Devices Configuration OnBoard AC’97 Audio [Auto] OnChip SATA Boot ROM [Enabled] OnBoard Promise Controller [Enabled] Operating Mode [Onboard IDE Operate Mode] OnBoard LAN [Enabled] OnBoard LAN Boot ROM [Disabled] Parallel Port Address [378] Parallel Port Mode [Normal] Parallel Port IRQ [IRQ7] Onboard Game Port [Disabled] Onboard MIDI Port [Disabled] 4.4.4 PCI PnP Plug and Play O/S [No] PCI Latency Timer [64] Allocate IRQ to PCI VGA [Yes] Palette Snooping [Disabled] 4.4.5 JumperFree Configuration CPU FSB Frequency [200MHz] VCORE Offset [None] DDR Voltage [Auto] AGP Voltage [1.5V] 4.4.6 Speech Configuration Speech POST Reporter [Enabled] Report IDE Error [Disabled] Report System Booting [Disabled] 4.4.7 Instant Music Configuration Instant Music [Disabled] Instant Music CD-ROMDrive [IDE Secondary Master] 4.5.1 Suspend Mode [S1 (POS) & S3 (STR)] 4.5.2 Repost Video on S3 Resume [No] 4.5.3 ACPI 2.0 Support [No] 4.5.4 ACPI APIC Support [Enabled] 4.5.5 APM Configuration Power Management/APM [Enabled] Power Button Mode [On/Off] Suspend Power Saving Type [C3] Restore on AC Power Loss [Power Off] Suspend Time Out [Disabled] Hard Disk Time Out (Minute) [Disabled] Video Power Down Mode [Suspend] Hard Disk Power Down Mode [Suspend] Advanced Resume Events Controls 4.5.6 Hardware Monitor MB Temperature [xxxC/xxxF] CPU Temperature [xxxC/xxxF] CPU Fan Speed [xxxxRPM] or [N/A] Chassis Fan Speed [xxxxRPM] or [N/A] Q-FanControl [Disabled] VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage 4.6.1 Boot Device Priority 1st ~ xxth Boot Device [1st Floppy Drive] 4.6.2 Boot Settings Configuration Quick Boot [Enabled] Full Screen Logo [Enabled] Add On ROM Display Mode [Force BIOS] Bootup Num-Lock[On] 4.6.3 Security Change Supervisor Password User Access Level (Full Access] Change User Password Clear User Password Password Check [Setup] Boot Sector Virus Protection [Disabled] Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults Software support VIA RAID configurations Promise® RAID configurations Marvell® Virtual Cable Tester Technology 5.2.1 Running the support CD 5.2.2 Drivers menu VIA 4 in 1 drivers Promise FastTrak 378 Driver AD1980 SoundMAX Audio Driver VIA 6420 RAID Controller driver 5.2.3 Utilities menu ASUS PC Probe ASUS Update PC-CILLIN2002 Adobe Acrobat Reader 5.2.4 ASUS Contact Information 5.2.5 Other information Motherboard Info Browse this CD Technical Support Form Filelist 5.3.1 ASUS Update 5.3.2 ASUS MyLogo2™ 4.From the selection that appears, choose a logo image. Click Next 5.When you click on an image, it displays larger on the MyLogo2 screen 7.When finished, click Exit, then reboot your computer Your system boots with the new boot logo 5.3.3 ASUS PC Probe Starting ASUS PC Probe Using ASUS PC Probe Monitoring Information Utility ASUS PC Probe Task Bar Icon 5.3.4 Multi-channelaudio feature Setting to multi-channelaudio Play Test Noise button becomes button. Click this button at any time to stop playing 9.Click the Close button when done Close Adjusting the volume settings Adjusting the microphone settings Rear panel audio ports function variation RAID data striping 5.4.1 Install the Serial ATA (SATA) hard disks 5.4.2 Entering VIA Tech RAID BIOS Utility 5.4.3 Create Array 5.4.3.1 RAID 0 for performance 5.4.3.2 RAID 1 for data protection 5.4.4 Delete Array 5.4.5 Select Boot Array 5.4.6 Serial Number View RAID 0+1 5.5.1 Install the hard disks 5.5.2 Enter the MBFastBuild™ utility 5.5.3 Creating a RAID 0 array (Performance) 5.5.4 Creating a RAID 1 array (Security) Creating a Security Array with New Drives Creating a Security Array with Existing Data Drive 5.5.5 Other FastBuild Utility Commands Controller Configuration (6): Important Notes Using Virtual Cable Tester (VCT) Virtual Cable Tester 5. Click on Run to execute test Run Run