3.Keyboard power (3-pin KBPWR)

This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard (the default value is [Disabled]). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS (see section 4.5.1 Power Up Control).

KBPWR

1

2

 

2

3

 

 

 

 

 

+5V +5VSB (Default)

K8V

K8V Keyboard Power Setting

2-22

Chapter 2: Hardware information