4.1.4 Using ASUS EZ Flash to update the BIOS

The ASUS EZ Flash feature allows you to easily update the BIOS without having to go through the long process of booting from a diskette and using a DOS-based utility. The EZ Flash is built-in the BIOS firmware so it is accessible by simply pressing <Alt> + <F2> during the Power-On Self Tests (POST).

To update the BIOS using ASUS EZ Flash:

1.Visit the ASUS website (www.asus.com) to download the latest BIOS file for your motherboard and rename the downloaded file as K8V Deluxe.ROM. Save the BIOS file to a floppy disk.

2.Reboot the system.3.To launch EZ Flash, press <Alt> + <F2> during POST to display the following.

User recovery requested. Starting BIOS recovery...

Checking for floppy...

•If there is no floppy disk found in the drive, the error message “Floppy not found!” appears.

•If the correct BIOS file is not found in the floppy disk, the error

 

message “K8V Deluxe.ROM not found!” is displayed. Make sure

to

rename the downloaded BIOS file as “K8V Deluxe.ROM”.

 

 

4.Insert the floppy disk that contains the BIOS file. If all the necessary files are found in the floppy disk, EZ Flash performs the BIOS update process and automatically reboots the system when done.

DO NOT shutdown or reset the system while updating the BIOS! Doing so may cause system boot failure!

User recovery requested. Starting BIOS recovery...

Checking for floppy...

Floppy found!

Reading file “K8V Deluxe.rom”. Completed.

Start flashing...

Flashed successfully. Rebooting.

4-4

Chapter 4: BIOS Setup