4.4.1.1HyperTransport Configuration

HyperTransport Configuration

 

 

HT Tristate Enable

[Enabled]

CRC Flood Enable

[Disabled]

HT Frequency

[800 MHz]

HT DATA Width(Upstream)

[16

BIT]

HT DATA Width(Downstream)

[16

BIT]

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

HT Tristate Enable [Enabled]

This item enables or disables the HyperTransport Tristate that enables the tristate link during the disconnected state of an LDTSTOP.

Configuration options: [Disabled] [Enabled]

CRC Flood Enable [Disabled]

This item enables or disables the CRC Flood that enable the generation of syncronized packets on CRC Error.

Configuration options: [Disabled] [Enabled]

HT Frequency [800 MHz]

This item allows frequency selection of HyperTransport transfer from K8 CPU to AGP. Configuration options: [200 MHz] [400 Mhz] [600 Mhz] [800 Mhz]

HT DATA Width (Upstream) [16 BIT]

This item allows selection of HyperTransport upstream data width. Configuration options: [16 BIT] [8 BIT]

HT DATA Width (Downstream) [16 BIT]

This item allows selection of HyperTransport downstream data width. Configuration options: [16 BIT] [8 BIT]

4-14

Chapter 4: BIOS Setup