TRRD [Auto]

Configuration options: [Auto] [2T] [3T] [4T] [5T]

TRC [Auto]

Configuration options: [Auto] [11T] [12T] [13T]~[26T]

Bank Interleaving [Auto]

Sets to [Auto] or disables the Bank Memory Interleaving. Configuration options: [Disabled] ������[Auto]

Enable Clock to All DIMMs [Disabled]

Enables or disables the unused clocks to DIMMs.

Configuration options: [Disabled] [Enabled]

MemClk Tristate C3/ATLVID [Disabled]

Enables or disables the MemClk Tri-Stating during C3 and Alt VID. Configuration options: [Disabled] [Enabled]

Memory Hole Remapping [Enabled]

Enables or disables the Memory Remapping around Memory Hole. Configuration options: [Disabled] [Enabled]

ECC Configuraiton

 

 

 

BIOS SETUP UTILITY

 

Advanced

 

 

ECC Controller

 

 

 

DRAM ECC Enable

[Enabled]

4-Bit ECC Mode

[Disabled]

DRAM SCRUB REDIRECT

[Disabled]

DRAM BG Scrub

[Disabled]

L2 Cache BG Scrub

[Disabled]

Data Cache BG Scrub

[Disabled]

Select the DRAM Frequency programming method. If Auto, the DRAM speed will be based on SPDs.

If Limit, the DRAM speed will not exceed the specified value. If Manual, the DRAM specified will be programmed regardless

DRAM ECC Enable [Enabled]

Allows you to enable or disable DRAM ECC, which allows the hardware to report and correct memory errors automatically to maintain system integrity. Configuration options: [Disabled] [Enabled]

4-Bit ECC Mode [Disabled]

Enables or disables the 4-bit ECC mode.

Configuration options: [Disabled] [Enabled]

DRAM SCRUB REDIRECT [Disabled]

Allows you to enable or disable DRAM scrub redirect, which allows the system to correct DRAM ECC errors immediately when they occur, even if background scrubbing is on. Configuration options: [Disabled] [Enabled]

2-22

Chapter 2: BIOS setup