Asus M2A-MVP 2.5.5APM Configuration, Restore on AC Power Loss [Disabled], Power On By PS/2 Keyboard [Disabled], Power On By PS/2 Mouse [Disabled]

2.5.5APM Configuration

APM Configuration
			Options
Restore on AC Power Loss		[Disabled]	Disabled
Power On By PS/2	Keyboard	[Disabled]	Power On
			Power Off
Power On By PS/2	Mouse	[Disabled]	Last State
Power On By External Modems		[Disabled]
Power On By PCI/PCIe Devices		[Disabled]
RTC Resume		[Disabled]

Restore on AC Power Loss [Disabled]

When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system goes on after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the AC power loss.

Configuration options: [Disabled] [Power Off] [Power On] [Last State]

Power On By PS/2 Keyboard [Disabled]

Allows you to use specific keys on the keyboard to turn on the system. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]

Power On By PS/2 Mouse [Disabled]

When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on the system. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]

Power On By External Modems [Disabled]

This allows either settings of [Enabled] or [Disabled] for powering up the computer when the external modem receives a call while the computer is in Soft-off mode. Configuration options: [Disabled] [Enabled]

The computer cannot receive or transmit data until the computer and applications are fully running. Thus, connection cannot be made on the first try. Turning an external modem off and then back on while the computer is off causes an initialization string that turns the system power on.

Power On By PCI/PCIe Devices [Disabled]

When set to [Enabled], this parameter allows you to turn on the system through a PCI LAN or modem card. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.

Configuration options: [Disabled] [Enabled]

2-30 Chapter 2: BIOS setup