7.ATX power connectors (24-pin ATXPWR1,4-pin ATX12V1)

These connectors are for an ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

•Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot.

•Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

•Make sure that your power supply unit (PSU) can provide at least the minimum power required by your system. See the table below for details.

M2N-L

M2N-L ATX Power Connector

ATX12V1

GND GND +12V DC +12V DC

ATXPWR1

+3 Volts

+3 Volts Ground +5 Volts Ground +5 Volts Ground Power OK

+5V Standby

+12 Volts

+12 Volts

+3 Volts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

+3 Volts

-12 Volts Ground PSON# Ground Ground Ground -5 Volts

+5 Volts

+5 Volts

+5 Volts

Ground

ASUS M2N-L

2-23