4.5.4APM Configuration

APM Configuration

 

 

 

Options

 

 

Power Off

Resume on PME#

[Disabled]

Power On

Resume on Ring

[Disabled]

Last State

Resume on RTC Alarm

[Disabled]

 

Restore on AC Power Loss

[Last state]

 

Resume On PME# [Disabled]

When this item is set to [Enabled]. A PME (Power Management Event) can turn on the system. Configuration Options: [Disabled] [Enabled]

Resume On Ring [Disabled]

This allows either settings of [Enabled] or [Disabled] for powering up the computer when the external modem receives a call while the computer is in Soft-off mode. Configuration options: [Disabled] [Enabled]

Resume On RTC Alarm [Disabled]

Allows you to enable or disable RTC to generate a wake event. When this item is set to Enabled, the items RTC Alarm Date/ RTC Alarm Hour/ RTC Alarm Minute/ RTC Alarm Second will become user-configurable with set values.

Configuration options: [Disabled] [Enabled]

Restore on AC Power Loss [Last State]

When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state, whatever the system state was before the AC power loss.

Configuration options: [Power Off] [Power On] [Last State]

4-26

Chapter 4: BIOS setup