Memory Configuration

The memory configuration menu allows you to change the memory settings.

Memory Configuration

 

Bank Interleaving

[Disabled]

Channel Interleaving

[Disabled]

Enable Clock to All DIMMS

[Disabled]

MemClk Tristate C3/ALTVID

[Disabled]

Memory Hole Remapping

[Enabled]

DCT Unganged Mode support

[Always]

Power Down Enable

[Enabled]

Select the DRAM Frequency program method. If Auto, the DRAM speed will be based on SPDs. If Limit, the DRAM speed will not exceed the specific value. If Manual, the DRAM will be programmed regardless.

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Bank Interleaving [Disabled]

Allows you to enable the bank memory interleaving.

Configuration options: [Disabled] [Auto]

Channel Interleaving [Disabled]

Allows you to enable the channel memory interleaving.

Configuration options: [Disabled] [Address bits 6] [Address bits 12] [XOR of Address bits [20:16, 6]] [ XOR of Address bits [20:16, 9]]

Enable Clock to All DIMMs [Disabled]

Enables or disables unused Clocks to DIMMs when memory slots are not populated.

Configuration options: [Disabled] [Enabled]

MemClk Tristate C3/ALTVID [Disabled]

Enables or disables MemClk Tri-Stating during C3 and Alt VID. Configuration options: [Disabled] [Enabled]

Memory Hole Remapping [Enabled]

Enables or disables the memory remapping around memory hole. Configuration options: [Disabled] [Enabled]

DCT Unganged Mode support [Always]

Enables or disables DCT Unganged Mode.

Configuration options: [Auto] [Always]

Power Down Enable [Enabled]

Enables or disables DDR power down mode.

Configuration options: [Disabled] [Enabled]

4-16

Chapter 4: BIOS setup