PIO Mode [Auto]

Selects the PIO mode.

Configuration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [Auto]

Selects the DMA mode.

Configuration options: [Auto]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.

Configuration options: [Disabled] [Enabled]

4.3.5IDE Configuration

The items in this menu allow you to set or change the configurations for the IDE devices installed in the system. Select an item then press <Enter> if you wish to configure the item.

IDE Configuration

OnBoard PCI IDE Controller

[Enabled]

Serial-ATA Devices

[Device 0/1/2]

nVidia RAID Setup

 

Hard Disk Write Protect

[Disabled]

IDE Dectect Time Out (Sec)

[35]

ATA(PI) 80Pin Cable Detection

[Host]

OnBoard PCI IDE Controller [Enabled]

Enables or disables primary IDE controllers. Configuration options: [Disabled] [Enabled]

Serial-ATA Devices [Device 0/1/2]

DISABLED: disables the intergrated IDE Controller. ENABLED: enables the intergrated IDE Controller.

Enables or disables the SATA0/1/2 IDE Interfaces.

Configuration options: [Disabled] [Device 0] [Device 0/1] [Device 0/1/2]

ASUS M2N-L

4-11