Asus M2N-SLI M2N-SLIDELUXE ATX Power Connector, M2N-SLIDELUXE Chassis Intrusion Connector, 8.Chassis intrusion connector (4-1pin CHASSIS)

8.Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature.

M2N-SLI DELUXE

+5VSB MB Chassis Signal GND

CHASSIS

(Default)

M2N-SLI DELUXE Chassis Intrusion Connector9.ATX power connectors (24-pin ATXPWR, 4-pin EATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

	ATX12V	EATXPWR
GND	GND	+3 Volts	+3 Volts
+12V DC	+12V DC
		-12 Volts	+3 Volts
		Ground	Ground
		PSON#	+5 Volts
		Ground	Ground
		Ground	+5 Volts
		Ground	Ground
M2N-SLI DELUXE		-5 Volts	Power OK
		+5 Volts	+5V Standby
		+5 Volts	+12 Volts
		+5 Volts	+12 Volts
		Ground	+3 Volts

M2N-SLI DELUXE ATX Power Connector

ASUS M2N-SLI Deluxe 2-29