• For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 600 W.

•Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot.

•Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

10.Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.

 

 

AAFP

 

Azalia-compliant

AC ‘97-compliant

pin definition

pin definition

GND PRESENCE# SENSE1 RETUR

SENSE2 RETUR

AGND NC NC

NC

M2N-SLI DELUXE

 

 

 

PORT1 L PORT1 R PORT2 R SENSE SEND PORT2 L

MIC2 L MICPWR Line out R NC Line out L

M2N-SLI DELUXE Azalia Front Panel Audio Connector

•We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.

•By default, this connector is set to AC97 Audio. If you want to connect a

High Definition front panel audio module to this connector, set the Front Panel Support Type item in the BIOS to [HD Audio]. See section “4.4.7

Onboard Device Configuration” for details..

2-30

Chapter 2: Hardware information