4.1.3ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS‑based utility. The EZ Flash utility is built-in the BIOS chip so it is accessible by pressing <Alt> + <F2> during the Power-On Self-Test (POST).

To update the BIOS using EZ Flash 2:

1.Visit the ASUS website (www.asus.com) to download the latest BIOS file for the motherboard.

2.Save the BIOS file to a floppy disk or a USB flash disk, then restart the system.

3.You can launch the EZ Flash 2 by two methods.

(1)Insert the floppy disk / USB flash disk that contains the BIOS file to the floppy disk drive or the USB port.

Press <Alt> + <F2> during POST to display the following.

 

ASUSTek EZ Flash 2 BIOS ROM Utility B312

FLASH TYPE: Winbond W39V080A 8Mb LPC

 

Current ROM

 

 

Update ROM

BOARD:

M2NSLI Deluxe

BOARD: Unknown

VER: 0122

VER: Unknown

DATE: 04/27/2006

DATE: Unknown

PATH: C:\M2N320C

 

 

 

 

 

 

 

A:

 

WIN98SE

<DIR>

 

 

NETTERM

<DIR>

 

C:

 

 

 

 

 

DRIVERS

<DIR>

 

 

 

 

RECYCLED

<DIR>

 

 

 

 

WUTEMP

<DIR>

 

 

 

 

NEWFOL~1

<DIR>

 

 

 

 

INSTALL

<DIR>

 

 

 

 

TEST_REB

<DIR>

 

 

 

 

MSDOWNLD.TMP

<DIR>

 

 

 

 

 

 

 

 

Note

Select

[S] Save

[ESC] Exit

 

[Enter]

 

[Tab] Switch

[Up/Down/Home/End] Move

(2)Enter BIOS setup program. Go to the Tools menu to select EZ Flash 2 and press <Enter> to enable it.

You can switch between drives by pressing <Tab> before the correct file is found. Then press <Enter>.

4.When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process and automatically reboots the system when done.

• This function can support devices such as USB flash disk, hard disk, or floppy disk with FAT 32/16/12 format only.

•Do not shut down or reset the system while updating the BIOS to prevent system boot failure!

ASUS M2N-SLI Deluxe

4-