ASUS M2N32-SLI Deluxe 5-39
5.4.3 Silicon Image RAID congurations
The Silicon Image RAID controller supports RAID 0, RAID 1 and JBOD
congurations. Use the Silicon Image RAID utility to congure a disk array.

Setting the BIOS RAID items

After installing the hard disk drives, make sure to set the necessary RAID
items in the BIOS before setting your RAID conguration.
To set the BIOS RAID items:
1. Boot the system and press <Del> during the Power-On Self-Test (POST)
to enter the BIOS Setup Utility.
2. From the Advanced > Onboard Devices Conguration menu item in the
BIOS set the Silicon Image Controller item to RAID Mode. See section
“4.4.6 Onboard Devices Conguration” for details.
3. Save your changes and Exit Setup.

Launching the Silicon Image Array Management Software

Launch the Silicon Image Array Management software from Windows® XP by
clicking the Start button and selecting All Programs > Silicon Image > Sam
For details on the Silicon Image SATARaid™ RAID conguration, refer to
the “Sil3132 User Guide” in your motherboard support CD.