2-24 Chapter 2: Hardware information

3. NVIDIA® nForce® 590 SLI Southbridge Serial ATA connectors (7-pin
SATA1 [red], SATA2 [red], SATA3 [red], SATA4 [red], SATA5 [red], SATA6 [red])These connectors are for the Serial ATA signal cables for Serial ATA 3.0 Gb/s hard disk and optical disk drives. The Serial ATA 3.0 Gb/s is backward compatible with Serial ATA 1.5 Gb/s specication.If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 0+1, RAID 5, or JBOD conguration through the onboard NVIDIA® MediaShield™ controller.

The RAID function of these connectors is set to [Disabled] by default. If you

intend to create a Serial ATA RAID set using these connectors, enable the RAID

Enabled item in the SATA Conguration sub-menu in the BIOS. See section

“4.4.7 Onboard Device Conguration” for details.

M2N32-SLI DELUXE

M2N32-SLI DELUXE

IDE connector

PRI_IDE
NOTE:Orient the red markings(usually zigzag) on the IDE ribbon cable to PIN1.PIN1
M2N32-SLI DELUXE

M2N32-SLI DELUXE

SATA connectors

SATA1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
SATA2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
SATA3
GND
RSATA_TXP3
RSATA_TXN3
GND
RSATA_RXP3
RSATA_RXN3
GND
SATA4
GND
RSATA_TXP4
RSATA_TXN4
GND
RSATA_RXP4
RSATA_RXN4
GND
SATA5
GND
RSATA_TXP5
RSATA_TXN5
GND
RSATA_RXP5
RSATA_RXN5
GND
SATA6
GND
RSATA_TXP6
RSATA_TXN6
GND
RSATA_RXP6
RSATA_RXN6
GND