2-26 Chapter 2: Hardware information
5. USB connectors
Wireless Edition: (10-1 pin USB56, USB78)
Standard Version: (10-1 pin USB56, USB 78, USB910_WFGBT)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specication that supports up to 480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
6. IEEE 1394a port connector (10-1 pin IE1394_1)
This connector is for a IEEE 1394a port. Connect the IEEE 1394a module
cable to this connector, then install the module to a slot opening at the back
of the system chassis.
M2N32-SLI DELUXE
M2N32-SLI DELUXE
IEEE 1394 connector
IE1394_1
TPA2-+
GND
TPB2-+
+12V
GND
TPA2+
GND
TPB2+
+12V
M2N32-SLI DELUXE
M2N32-SLI DELUXE
USB 2.0 connectors
USB78
USB910
NC
GND
USB_P8+
USB_P8-
USB+5V
GND
USB_P7+
USB_P7-
USB+5V
USB56
NC
GND
USB_P6+
USB_P6-
USB+5V
GND
USB_P5+
USB_P5-
USB+5V
NC
GND
USB_P10+
USB_P10-
USB+5V
GND
USB_P9+
USB_P9-
USB+5V
You can connect the USB cable to ASUS Q-Connector (USB, blue) rst, and
then install the Q-Connector (USB) to the USB connector onboard.
(for snardard version only)