6.1.3Installing AMD Chipset Driver
To install the driver that supports Hybrid CrossFireX technology:
1.Insert the Support DVD that comes with your motherboard into the optical drive. The DVD automatically displays the Drivers menu if Autorun is enabled in your computer.
If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP.EXE from the BIN folder.
2.From the Drivers menu, click AMD Chipset Driver to install it. Follow the onscreen instructions to finish the installation.
3.Restart your computer after the installation is completed.
4.When the system restarts, wait for a few seconds for the driver to load automatically.
6.1.4Using the ATI CATALYST® Control Center
Using an add-on graphics card
1.Install a graphics card onto your motherboard. Refer to the User Guide that comes with your graphics card for details.
2.
3.Click Graphics Settings > CrossFire™, then select the Enable CrossFire™ check box. When a
confirmation message pops up, click Yes. The screen blacks out for about one minute.
4.Click OK. The
Chapter 6: ATI Hybrid CrossFireX technology support |