4.4.6Onboard Devices Configuration
| Advanced |
|
|
| |
Onboard Devices Configuraiton |
| Allows BIOS to Select | |||
|
|
|
| Serial Port1 Base | |
Serial Port1 Address | [3F8/IRQ4] | ||||
Addresses. | |||||
HD Audio Azalia Device | [Auto] |
| |||
Front Panel Support Type | [HD Audio] |
| |||
SPDIF_OUT Mode Setting | [SPDIF Output] |
| |||
Onboard 1394 | [Enabled] |
| |||
Onboard Marvell Lan | [Enabled] |
| |||
Onboard Marvell LAN Boot ROM [Disabled] |
| ||||
Primary Display Adapter |
| ||||
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
HD Audio Azalia Device [Auto]
Allows you to enable or disable the High Definition Audio. The following item appears only when you set this item to [Auto].
Configuration options: [Auto] [Disabled]
Front Panel Support Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or
Configuration options: [AC97] [HD Audio]
SPDIF_OUT Mode Setting [SPDIF Output]
If your graphics card has HDMI output and needs to use SPDIF signal from the SPDIF_Out header, you need to set to HDMI output for HDMI audio output. Configuration options: [SPDIF Output] [HDMI Output]
Onboard 1394 [Enabled]
Allows you to enable or disable the onboard 1394 device support. Configuration options: ����������[Disabled] [Enabled]���������
Onboard Marvell LAN [Enabled]
Configuration options: [Enable] [Disabled]
Onboard Marvell LAN Boot ROM [Disabled]
This item appears only when you enable the previous item.
Configuration options: [Enable] [Disabled]
Primary Display Adapter [PCI-E]
Allows you to select which graphics controller to use as the primary boot device. Configuration options:
Chapter 4: BIOS setup |