DMA Mode [Auto]

Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] [UDMA6]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.

Configuration options: [Disabled] [Enabled]

4.3.5SATA1/2/3/4/5/6

While entering Setup, the BIOS automatically detects the presence of SATA devices. There is a separate sub-menu for each SATA device. Select a device item then press <Enter> to display the SATA device information.

BIOS SETUP UTILITY

Main

Third IDE Master

Device

: Hard Disk

Vendor

: HDT722516DLA380

Size

: 164.7GB

LBA Mode

: Supported

Block Mode

: 16Sectors

PIO Mode

: 4

Async DMA

: MultiWord DMA-2

Ultra DMA

: Ultra DMA-6

SMART Monitoring: Supported

Disabled: Disables LBA Mode.

Ayto: Enables LBA Mode if the device supports it and the device is not already formatted with LBA Mode disabled.

LBA/Large Mode

[Auto]

 

Select Screen

Block(Multi-sector Transfer)M

[Auto]

 

PIO Mode

[Auto]

 

Select Item

DMA Mode

[Auto]

+-

Change Option

SMART Monitoring

[Auto]

F1

General Help

32Bit Data Transfer

[Enabled]

F10

Save and Exit

 

 

ESC

Exit

v04.61 (C)Copyright 1985-2008, American Megatrends, Inc.

The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring). These values are not user-configurable. These items show N/A if no IDE device is installed in the system.

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto]

4-14

Chapter 4: BIOS setup