5 Chapter
Creating a RAID volume
To create a RAID volume:
1.In the Main Menu, press <2> to enter the LD View / LD Define Menu function.
2.Press <Ctrl> + <C>, and the following screen appears.
3.Move to the RAID Mode item and press <Space> to select a RAID mode to create.
4.Move to the Assignment item by using the down arrow key and set Y to select the hard disk drives you want to include in the RAID set.
5.Press <Ctrl> + <Y> to save the setting.
6.The utility prompts the following message. Press <Ctrl> + <Y> to input the LD name.
7.Enter an LD name, and then press any key to continue.
Enter the LD name here:
8.Press <Ctrl> + <Y> to erase the MBR, or you may press any key to abort the settings.
9.Press <Ctrl> + <Y> to enter the screen to modify the array capacity, or press any key to use the maximum capacity.
Chapter 5: RAID configurations |