Updating the BIOS file
To update the BIOS file using BIOS Updater:
1.At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.
D:\>bupdater /pc /g
2.The BIOS Updater screen appears as below.
ASUSTek BIOS Updater for DOS V1.30 [2012/12/22]
FLASH TYPE: MX1C 25L1065A |
|
Current ROM | Update ROM |
BOARD:M5A97 LE R2.0 | BOARD:UNKNOWN |
VER: 0302 | VER: UNKNOWN |
DATE: 07/02/2012 | DATE: UNKNOWN |
PATH: A:\ |
|
A:M5A97LER20.CAP 2097152
| Note | Select or Load | [Tab] Switch | [V] Drive Info |
| [Enter] | |||
[Up/Down/Home/End] Move | [B] Backup | [Esc] Exit | ||
3.Press <Tab> to switch between screen fields and use the <Up/Down/Home/End> keys to select the BIOS file and press <Enter>. BIOS Updater checks the selected BIOS file and prompts you to confirm BIOS update.
Are you sure to update BIOS?
Yes No
4.Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure!
•For��� BIOS���� �������Updater �������version ����1.04 ��or ������later, ���the utility������� �������������automatically exits����� to�� the��� DOS���
prompt after updating BIOS.
•Ensure������ to�� load���� the��� BIOS���� �������default settings�������� ��to ������ensure ������system compatibility������������� and��� stability����������. Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3 of your motherboard user manual for details.
•Ensure������ to�� connect������� all��� SATA���� hard���� disk���� drives������ �����after ��������updating the��� BIOS���� ����file if�� ���you have����
disconnected them.
Chapter 3
ASUS M5A97 LE R2.0 |