3 Chapter
Azalia Front Panel [HD]
Allows you to set the Azalia front panel audio connector (AAFP) type to legacy AC’97
or | |
module supports. | |
[HD] | Sets the front panel audio connector (AAFP) mode to high definition |
| audio. |
[AC97] | Sets the front panel audio connector (AAFP) mode to legacy AC’97 |
SPDIF Out Type [SPDIF] | |
[SPDIF] | Sets to [SPDIF] for SPDIF audio output. |
[HDMI] | Sets to [HDMI] for HDMI audio output. |
3.5.8APM
ErP Ready [Disabled]
[Disabled] | Disables the Energy Related Products (ErP) Ready function. |
[Enabled] | Allows BIOS to switch off some power at S5 state to get system ready for |
| the ErP requirement. When set to [Enabled], power for WOL, WO_USB, |
| audio and onboard LEDs will be switched off at S5 state. |
| The following items appear only when you set the ErP Ready to [Disabled]. |
Restore AC Power Loss [Power Off]
[Power On] | The system goes into on state after an AC power loss. |
[Power Off] | The system goes into off state after an AC power loss. |
[Last State] | The system goes into either off or on state, whatever the system state was |
| before the AC power loss. |
Power On By PS/2 Device [Disabled]
[Disabled] | Disables the PS/2 devices from generating a wake event. |
[Enabled] | Enables the PS/2 devices to generate a wake event. |
Power On By PME [Disabled]
[Disabled] | Disables the PME devices from generating a wake event. |
[Enabled] | Enables the PME devices to generate a wake event. |
Power On By Ring [Disabled]
[Disabled] | Disables Ring to generate a wake event. |
[Enabled] | Enables Ring to generate a wake event. |
Power On By RTC [Disabled]
[Disabled] | Disables RTC to generate a wake event. |
[Enabled] | When set to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/ |
| Second will become |
Chapter 3: BIOS setup |