INSTALLATION .III (Connectors)

III.INSTALLATION

7.Board Power Input (12-pin block)

This connector connects to a standard 5 Volt power supply. To connect the leads from the power supply, ensure first that the power supply is not plugged. Most power supplies provide two plugs (P8 and P9), each containing six wires, two of which are black. Orient the connectors so that the black wires are located in the middle.

Using a slight angle, align the plastic guide pins on the lead to their receptacles on the connector. Once aligned, press the lead onto the connector until the lead locks into place.

PG +12V GND +5V

 

 

 

 

 

 

 

 

+5V

 

-12V

 

-5V

 

 

 

 

 

 

 

 

Power Connector on Motherboard

RED

RED

RED

WHT

BLK

BLK

BLK

BLK

BLU

YLW

RED

ORG

P8 P9

Power Plugs from Power Supply

8.IDE activity LED

This connector connects to the hard disk activity indicator light on the case.

+

IDE (Hard Drive) LED

24

P/E-P55T2P4D User’s Manual