(Power | .IV |
Manage) | BIOS |
|
|
IV. BIOS SOFTWARE
Video Off OptionThis field determines when to activate the video off feature. The settings are Susp,
This field defines the video off features. The first option V/H SYNC + Blank, which is the default setting, blanks the screen and turns off vertical and horizontal scan- ning; DPMS (acronym for Display Power Management System) allows the BIOS to control the video display card if it supports the DPMS feature; Blank Only only blanks the screen. Use the latter for monitors that do not support the “Green” fea- ture.
Take note that a screen saver software does not work with this feature. While the monitor is shut off, this software cannot display.
Suspend SwitchThis field enables or disables the SMI connector on the motherboard. This connector connects to the lead from the Suspend switch mounted on the system case. Default setting for this field is Enabled.
Doze Speed, Stdby SpeedThese two fields set the CPU speed during each mode. The number indicates what the normal CPU speed is divided by.
PM TimersThis section controls the
The system automatically “wakes up” from any power saving mode when there is system activity such as when a key is pressed from the keyboard, or when there is activity detected from the enabled IRQ channels.
HDD Power Down shuts down any IDE hard disk drives in the system after a period of inactivity. This time period is
The Doze Mode, Standby Mode, and Suspend Mode fields set the period of time after which each of these modes activate. At Max Saving, these modes activate sequentially (in the given order) after one minute; at Min Saving after one hour.
40 |