Asus P/I-P55T2P4 DRAM Memory Installation Procedures:

III. INSTALLATION

DRAM Memory Installation Procedures:

1.The SIMM memory modules will only fit in one orientation as shown because of a "Plastic Safety Tab" on one end of the SIMM sockets which requires the "Notched End" of the SIMM memory modules.

1 2 3 4

Bank0 Bank1

72 Pin SIMM DRAM Sockets & Module

Notched End

III. INSTALLATION (DRAM Memory)

2.Press the memory module firmly into place starting from a 45 degree angle making sure that all the contacts are aligned with the socket.

3.With your finger tips, rock the memory module into a vertical position so that it clicks into place.

Support Clip 72 Pin DRAM in SIMM Socket

Safety Tab (This Side Only) Mounting Hole

4.The plastic guides should go through the two "Mounting Holes" on the sides and the "Metal Clips" should snap on the other side.

5.To release the memory module, squeeze both "Metal Clips" outwards and rock the module out of the "Metal Clips".

ASUS P/I-P55T2P4 User's Manual 13