Cards SCSI ASUS .VI Numbers) ID (SCSI

VI. ASUS PCI SCSI Cards

SCSI Device 1

SCSI Device 2

Termination Required

Termination Required

(End Device)

(JP5 Open)

 

 

 

 

 

 

SCSI Device 3

 

SCSI Device 4

 

 

 

 

 

Termination Required

No Termination Required(End Device)

(JP5 Short)

Termination Required

(End Device)

 

SCSI Device 2

 

SCSI Device 1

 

 

 

 

 

 

 

 

 

 

 

 

SCSI ID Numbers for SCSI Devices

All SCSI devices, including the ASUS PCI-SC200 and ASUS PCI-SC860 interface card must have a SCSI identification number that is not in use by any other SCSI device. There are eight possible ID numbers, 0 through 7. The ASUS PCI-SC200 and ASUS PCI-SC860 cards have fixed SCSI IDs of 7. The SCSI ID serves two purposes:

•It uniquely defines each SCSI device on the bus.

•It determines which device controls the bus when two or more devices try to use it at the same time.

SCSI IDs on one channel do not interfere with the IDs on another channel. This applies to two SCSI host adapters that implement different buses as well as dual channels on a single host adapter. You can connect up to seven SCSI devices to the interface card. You must set a SCSI ID number (ID 0 to ID 6) for each device. SCSI devices vary in how they set the ID number. Some use jumpers, others have some kind of selector switch. Refer to the manual for any device you install for details on how to set its ID number.

SCSI ID Priority

The ASUS PCI-SC200 and ASUS PCI-SC860 are 8bit single-channel SCSI cards. SCSI ID 7 has the highest priority, and SCSI ID 0 has the lowest priority.

56

ASUS P/I-P55T2P4 User's Manual