(BIOS

.IV

Features)

BIOS

 

 

IV. BIOS SOFTWARE

PCI/VGA Palette Snoop

Some display cards that are nonstandard VGA such as graphics accelerators or MPEG Video Cards may not show colors properly. The setting Enabled should correct this problem. Otherwise leave this on the setup default setting of Disabled.

OS/2 Onboard Memory > 64M

When using OS/2 operating systems with installed DRAM of greater than 64MB, you need to Enable this option otherwise leave this on the setup default of Disabled.

......................................................................................................................................

Video ROM BIOS Shadow

This field allows you to change the video BIOS location from ROM to RAM. Relocating to RAM enhances system performance because information access is faster than to ROM. Setup default setting is Enabled.

C8000 – CBFFF Shadowto DC000 – DFFFF Shadow

These fields are used for shadowing other expansion card ROMs. If you install other expansion cards with ROMs on them, you will need to know which addresses the ROMs use to shadow them specifically. Shadowing a ROM reduces the memory available between 640KB and 1024KB by the amount used for this purpose. Leave on default setting of Disabled.

......................................................................................................................................

Boot Up NumLock Status

This field enables users to activate the Number Lock function upon system boot. The setup default setting for this field is On.

Boot Up System SpeedThis has no function and should be left at the setup default of High.Typematic Rate Setting

When enabled, you can set the two typematic controls listed below. Setup default setting is Disabled.

Typematic Rate (Chars/Sec)

This field controls the speed at which the system registers repeated keystrokes. Options range from 6 to 30 characters per second. Setup default setting is 6; other settings are 8, 10, 12, 15, 20, 24, and 30.

Typematic Delay (Msec)

This field sets the time interval, in milliseconds, for displaying the first and second characters. Four delay rate options are available: 250 (default), 500, 750 and 1000.

36

ASUS P/I-P55T2P4 User’s Manual