BIOS .IV Management) (Power

IV. BIOS SOFTWARE

Power Management Setup

This “Power Management Setup” option allows you to reduce power consumption. This feature turns off the video display and shuts down the hard disk after a period of inactivity.

Details of Power Management Setup:

Power Management (User Define)

This field acts as the master control for the power management modes. User Define allows you to set power saving options according to your preference; Disable disables the power saving features; Min Saving puts the system into power saving mode after a long period of system inactivity; Max Saving puts the system into power saving mode after a brief period of system inactivity.

IMPORTANT: Advanced Power Management (APM) should be installed to keep the system time updated when the computer enters suspend mode activated by the BIOS Power Management. For DOS environments, you need to add DEVICE=C:\DOS\POWER.EXE in you CONFIG.SYS. For Windows 3.1x and Windows 95, you need to install Windows including the APM feature. A battery and power cord icon labeled "Power" will appear in the “Control Panel.” Choose “Advanced” in the Power Management Field.

Video Off Option (Susp,Stby -> Off )

This field determines when to activate the video off feature for monitor power man- agement. The settings are Susp,Stby -> Off, All Modes -> Off, Always On, and Suspend -> Off.

Video Off Method (DPMS OFF)

This field defines the video off features. The following options are available: DPMS OFF, DPMS Reduce ON, Blank Screen, V/H SYNC+Blank, DPMS Standby, and DPMS Suspend. The DPMS (Display Power Management System) features allow the BIOS to control the video display card if it supports the DPMS feature. Blank Screen only blanks the screen (use this for monitors without power management or “green” features. If set up in your system, your screen saver will not display with Blank Screen selected). V/H SYNC+Blank blanks the screen and turns off vertical and horizontal scanning.

40

ASUS P/I-P55T2P4 User’s Manual