III.INSTALLATION

5.Floppy drive connector (34-pin block )

This connector supports the provided floppy drive ribbon cable. After connect- ing the single end to the board, connect the two plugs on the other end to the floppy drives. (Pin 5 is removed to prevent inserting in the wrong orienta- tion when using ribbon cables with pin 5 plugged).

Pin 1

Floppy Drive Connector

6.Power connector (12-pin block)

This connector connects to a standard 5 Volt power supply. To connect the leads from the power supply, ensure first that the power supply is not plugged. Most power supplies provide two plugs (P8 and P9), each containing six wires, two of which are black. Orient the connectors so that the black wires are located in the middle.

PG

 

+12V

 

GND

 

 

+5V

RED RED RED WHT BLK BLK BLK BLK BLU YLW RED ORG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

+5V

 

-12V

 

-5V

 

P8

P9

 

 

 

 

 

 

 

 

 

 

 

 

 

AT Power Connector on Motherboard

Power Plugs from

Power Supply

Using a slight angle, align the plastic guide pins on the lead to their receptacles on the connector. Once aligned, press the lead onto the connector until the lead locks into place.

INSTALLATION

(Connectors)

III.

 

 

 

ASUS P/I-P55TVP4 User's Manual

21