INSTALLATION .III

Connectors

III.INSTALLATION

6.Universal Serial BUS Connectors 1 & 2 (Two 4 pin Female) Two USB ports are available for connecting USB devices.

USB 1

Universal Serial Bus (USB) 2

7.RJ-45 Connector (8 pin Female)

This connector can be used to connect the onboard 32-bit 10/100 Mbps Ethernet LAN Controller (optional) to a host or a hub.

RJ-45 Port

8.Hard Disk Activity LED (2 pin IDELED)

This connector supplies power to the cabinet’s hard disk or IDE activity LED. Read and write activity by devices connected to the Primary or Secondary IDE connectors will cause the LED to light up.

TIP: If the case-mounted LED does not light, try reversing the 2-pin plug.

+

HD LED (for Adaptec and IDE)

P2B-D2 IDE Activity LED Lead

28

ASUS P2B-D2 User’s Manual