Asus P2B-N VIO, [1-2], [1-2], Enable, Setting, Disable, High Volt, Normal Volt, LANDIS EN Setting, 2)LAN Setting (LANDIS_EN), 1)+3V Voltage Selection (VIO)

SETUP H/W .3

Settings Motherboard

3.HARDWARE SETUP

1)+3V Voltage Selection (VIO)

This jumper allows you to select the voltage supplied to the DRAM, chipset, AGP, and the CPU’s I/O buffer. IMPORTANT! Setting this jumper to High Volt (3.5V) may cause your system to become unstable. It is strongly recommended that you leave this jumper on its default setting of Normal Volt (3.3V).

VIO		Setting
Normal Volt		[2-3] (default)
High Volt		[1-2]
VIO		VIO
	3	3
	2		2
1			1
Normal		High
Voltage		Voltage
(default)

P2B-N Voltage Input/Output Selection

2)LAN Setting (LANDIS_EN)

The onboard Intel 10/100 Fast Ethernet may be enabled or disabled using this jumper. The default is set to Enable.

LANDIS EN Setting

Enable		[2-3] (default)
Disable		[1-2]
LANDIS_EN		LANDIS_EN
	3	3
	2		2
1			1
Disable		Enable
(Default)

P2B-N Onboard LAN Setting

18 ASUS P2B-N User’s Manual