3.HARDWARE SETUP

2)LAN Activity Connectors (2-pin LAN_LED & 3-pin WOL_CON)

These connectors support Local Area Network (LAN) cards, such as the ASUS PCI-L101 (see 7.1 PCI-L101 Fast Ethernet Card) with output signals for data transfer activity. The LAN_LED connector allows the front panel LED to flash during transfer activity between the network and the computer. The WOL_CON connector allows the system to power up when there is a wakeup package (sig- nal) received from the network.

IMPORTANT: This feature requires that Wake On LAN is set to Enabled (see

4.6Power Management Setup) and that your system has an NLX power supply with at least 720mA +5V standby power.

NLX-R

NLX-R (Front)

+5 Volt Standby

 

 

Ground

 

+

PME

 

LAN_LED

 

 

(NLX-R only)

WOL_CON

 

B9-N (Front)

NLX-R & Yeong-Yang Risers

B9-N

 

 

 

Yeong-Yang (Front)

+5 Volt Standby

 

Ground

 

 

YEONG-YANG

 

PME

B9-N Riser

LAN Activity Connectors

3)Front Panel Connector (16-1 pins)

This connector is used to connect the front panel display LEDs and buttons to the motherboard through a ribbon cable.

H/W SETUP

Connectors

3.

 

 

 

NLX-R (Front)

NLX-R

FCON

B9-N (Front)

LED_CTRL

B9-N

Yeong-Yang (Front)

YEONG-YANG

Front Panel Display and Button Connector

Right Audio Channel

Left Audio Channel

Ground

14

Pin 1

The front panel display & buttons connect to the riser card through a ribbon cable.

- Power LED

- HDD LED - Reset Switch - Power Switch

- Speaker Connector

+

 

+

1

+ + +

1

ASUS P2B-N User’s Manual

37