3.HARDWARE SETUP

6)IDE Connectors (40-1 pins)

This connector supports the provided IDE hard disk drive ribbon cable. After connecting one end to the riser card, connect the other end to a hard disk drive. The primary IDE channel supports both a master and a slave IDE device, but some system housings only permit a standard IDE hard drive to be installed.

NLX-R (Back)

B9-N (Front)

B9-N

Pin 1

Orient the red stripe on the

IDE ribbon cable to Pin 1

Yeong-Yang (Front)

YEONG-YANG

IDE Connectors

7)3.5” Floppy Disk Drive Connector (34-1 pin FLOPPY)

This connector supports the provided floppy drive ribbon cable. After connect- ing the single end to the riser card, connect the other end to a 3.5” floppy disk drive. (Pin 5 is removed to prevent inserting in the wrong orientation when us- ing ribbon cables with pin 5 plugged.)

NLX-R (Front)

NLX-R

NLX-R Riser

Pin 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B9-N (Front)

Orient the red stripe on the

 

floppy ribbon cable to Pin 1

B9-N

 

 

B9-N & Yeong-Yang Risers

Yeong-Yang (Front)

Pin 1

 

YEONG-YANG

Floppy Disk Drive Connector

H/W SETUP

Connectors

3.

 

 

 

ASUS P2B-N User’s Manual

39