III. INSTALLATION

Jumper Settings

1.Real Time Clock (RTC) RAM (CLRTC)

The CMOS RAM is powered by the onboard button cell battery. To clear the RTC data: (1) Turn off your computer and unplug your AC power, (2) Short the two points (Labeled: CLRTC), (3) Turn on your computer, (4) Hold down <Delete> during bootup and enter BIOS setup to re-enter user preferences.

Short small solder points to clear

CLRTC

P2L97 Clear RTC RAM

2.Keyboard Power Up (KB_UP)

This allows you to disable or enable the keyboard power up function. Set to Enable if you want to use your keyboard (by pressing <Spacebar>) to power up your computer. This feature requires an ATX power supply that can supply at least 300mA on the +5VSB lead and the new ACPI BIOS support. The default is set to Disable because not all computers have the appropriate ATX power sup- ply. Your computer will not function if you set this to Enable and if you do not have the right ATX power supply.

KB_UP

KB_UP

1

1

2

2

3

3

Disable

Enable

(Default)

 

P2L97 Keyboard Power (Wake) Up

INSTALLATION

(Jumpers)

III.

 

 

 

ASUS P2L97 User’s Manual

13