III.INSTALLATION

2.System Memory (DIMM)

Only Dual Inline Memory Modules (DIMM) can be used with this motherboard. Sockets are available for 3.3Volt (power level) Unbuffered Synchronous DRAMs (SDRAM) or EDO DRAM of either 8, 16, 32, 64, or 128MB to form a memory size between 8MB to 384MB. One side (with memory chips) of the DIMM module takes up one Row on the motherboard.

To utilize the chipset’s Error Checking and Correction (ECC) feature, you must use a DIMM module with 9 chips per side (standard 8 chips/side + 1 parity chip) and make the proper settings in the BIOS Chipset Features Setup.

IMPORTANT: Memory speed setup is required through "Auto Configuration" in BIOS Chipset Features Setup.

Install memory in any combination as follows:

DIMM Location

168-pin DIMM Memory Modules

 

Total Memory

Socket 1 (Rows 0&1)

SDRAM/EDO 8, 16, 32, 64, 128MB

x1

 

 

 

 

 

Socket 2 (Rows 2&3)

SDRAM/EDO 8, 16, 32, 64, 128MB

x1

 

 

 

 

 

Socket 3 (Rows 4&5)

SDRAM/EDO 8, 16, 32, 64, 128MB

x1

 

 

 

 

 

 

Total System Memory (Max 384MB)

=

 

 

 

 

 

ASUS Memory Examples:EDO DIMM (9 chips, ECC)SDRAM DIMM (8 chips, Non-ECC)General DIMM Notes: (not true for all memory modules)

Four possible memory chips are supported: EDO or SDRAM with and without parity.

SDRAM chips are generally thinner with higher pin density than EDO chips.

BIOS shows EDO or SDRAM memory on bootup screen.

8 chip/side modules do not support parity, only 9 chip/side modules support parity.

Single-sided DIMMs come in 16 or 64 MB, double-sided come in 8, 32, or 128MB.

III. INSTALLATION (System Memory)

ASUS P2L97 User’s Manual

17