Asus P2Z-VM III.HARDWARE SETUP, VGAEN, [1-2], [2-3], Enable, Enable, KB WAK, Enable, Disable, WARNING, Setting, Disable, (default), Motherboard Settings

III.HARDWARE SETUP2.VGA Setting (VGAEN)

The VGAEN jumper allows you to enable or disable the onboard VGA. Disable the onboard VGA if you are using a VGA card on the expansion slot.

	Setting			VGAEN
	Enable			[1-2]		(default)
	Disable			[2-3]
			VGAEN
	1	2	3	1	2	3
P2Z-VM	Enable			Disable
	(Default)

P2Z-VM VGA Setting

3.Keyboard Power (Wake) Up (KB_WAK)

This allows you to disable or enable the keyboard power up function. Set this jumper to Enable if you wish to use your keyboard (by pressing any key or the spacebar, depending on your motherboard) to power up your computer. This feature requires an ATX power supply that can supply at least 300mA on the +5VSB lead. The default is set to Disable because not all computers have the appropriate ATX power supply. Your computer will not power ON if you set this to Enable and do not have the appropriate ATX power supply. WARNING! This jumper setting must coincide with the BIOS setting (see “Power Up By Keyboard” in the Power Management Setup of BIOS SETUP) or else conflicts will occur.

Setting	KB WAK
Disable	[1-2]	(default)
Enable	[2-3]

KB_WAK

1 2 3 1 2 3

Disable Enable (Default)

P2Z-VM

P2Z-VM Keyboard Power (Wake) Up

Motherboard Settings

III. H/W SETUP

ASUS P2Z-VM User’s Manual 15