V. SOFTWARE SETUP

Windows 98 First Time Installation

Installing Plug-and-Play Hardware

Onboard Audio

When you start Windows for the first time after the installation of your motherboard, Windows 98 will detect the onboard audio chip and invoke the Add New Hardware Wizard.

1. Click here.

3.Browse to E:\AUDIO\W95 (assuming E is your CD-ROM drive) and then click here.

2.Select Search for the best driver for your device and then click here.

4. Click here.

5. Click here.

Onboard Video

Windows 98 will also detect the onboard video chip and may attempt to install a driver from its system registry. When prompted to restart, select No. Then follow the procedures for installing the video driver later in this section.

IMPORTANT: Selecting No for the initial restart prompt is a necessary step because Windows may load an older driver that is incompatible with the onboard video chip. Always use the driver available on the ASUS Support CD or applicable driver updates from your ASUS vendor or from the ASUS web site.

S/W SETUP

Windows 98

V.

 

 

 

ASUS P2Z-VM User’s Manual

63