3.HARDWARE SETUP
3.2Layout Contents
Motherboard Settings |
|
| |
1) | JEN | p.18 | JumperFree™ Mode Setting (Enable/Disable) |
2) | CODEC | p.19 | Onboard Audio CODEC Setting (Enable/Disable) |
3) | SAFE_MD | p.20 | Safe Mode Setting (Normal/Safe Mode) |
4) | NO_REBOOT | p.20 | Automatic Timeout Reboot Setting (Normal/No Reboot) |
5) | PCI3VSEL | p.21 | PCI 3 Volt Setting (Normal/STB) |
6) | VIO | p.21 | I/O Voltage Setting (Normal/+3.66V) |
7) | p.22 | CPU External Clock (Bus) Frequency Setting |
1) | DIMM1, DIMM2, DIMM3 | p.25 | |
2) | CPU Slot 1 | p.26 | Central Processing Unit (CPU) Socket |
3) | ISA | p.33 | |
4) | PCI1, 2, 3, 4, 5, 6 | p.33 | |
5) | AMR | p.34 | Audio Modem Riser Slot |
1) | PS2KBMS | p.35 | PS/2 Mouse Connector |
2) | PS2KBMS | p.35 | PS/2 Keyboard Connector |
3) | USB | p.36 | Universal Serial Bus Port Connectors (Two |
4) | PRINTER | p.36 | Parallel Port Connector |
5) | COM1 | p.36 | Serial Port Connector |
6) | VGA | p.37 | Monitor (VGA) Output Connector |
7) | GAME_AUDIO | p.37 | Joystick/MIDI Connector |
8) | GAME_AUDIO | p.37 | Audio Port Connectors (Three 1/8” female) |
9) | PRIMARY/SECONDARY | p.38 | Primary/Secondary IDE Connectors (Two |
10) | IDELED | p.38 | IDE Device Activity LED Lead (2 pins) |
11) | FLOPPY | p.39 | Floppy Drive Port Connector (34 pins) |
12) | CHA_, CPU_, PWR_FAN p.39 | Chassis, CPU, Power Supply Fan Connectors (Three | |
13) | WOL_CON | p.40 | |
14) | WOR | p.40 | |
15) | VIDEO,AUX, CD1, MODEM p.41 | Internal Audio Connectors (Four | |
16) | SPKR | p.41 | Internal Speaker Connectors |
17) | INT MIC | p.42 | Internal Microphone Connector (3 pins) |
18) | SMB | p.42 | SMBus Connector |
19) | COM2 | p.43 | Serial Port Header |
20) | IR | p.43 | Infrared Module Connectors |
21) | ACHA | p.44 | Chassis Intrusion Alarm Connector |
Layout Contents
3. H/W SETUPASUS P3W User’s Manual | 15 |