SETUP H/W .3
Cards Expansion
3.HARDWARE SETUP
3.7.3Assigning DMA Channels for ISA Cards
Some ISA cards, both legacy and PnP, may also need to use a DMA (Direct Memory Access) channel. DMA assignments for this motherboard are handled the same way as the IRQ assignment process described earlier. To select a DMA channel, see PCI/ PNP ISA DMA Resource Exclusion in 4.4.3 PCI Configuration. NOTE: The onboard audio by default uses DMA1.
IMPORTANT: To avoid conflicts, reserve the necessary IRQs and DMAs for legacy ISA cards (see PCI/PNP ISA IRQ Resource Exclusion and PCI/PNP DMA IRQ Resource Exclusion in 4.4.3 PCI Configuration). Choose Yes in IRQ xx Used By ISA and DMA x Used By ISA for those IRQs and DMAs you want to reserve).
3.7.4 Audio Modem Riser (AMR) Slot
This connector supports a specially designed audio and/or modem card called an AMR. Main processing is done through software and controlled by the motherboard’s Intel I/O Controller Hub (ICH). This provides an upgradeable audio and/or modem solution at an incredibly low cost. There are two types of AMR, one defined as primary and another defined as secondary. This motherboard uses the primary channel so that a secondary AMR can coexist without the need to disable the onboard CODEC. The motherboard’s onboard CODEC must be disabled when using a primary AMR.
NOTE: An AMR is not included with this motherboard.
P3W
®
34 | ASUS P3W User’s Manual |