3.Serial ATA connectors (7-pin SATA1, SATA2)

These next generation connectors support the thin Serial ATA cables for primary internal storage devices. The current Serial ATA interface allows up to 150 MB/s data transfer rate, faster than the standard parallel ATA with 133 MB/s (UltraDMA133).

P4P800 SE

P4P800 SE SATA Connectors

SATA2

GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXP2 RSATA_RXN2 GND

SATA1

GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXP1 RSATA_RXN1 GND

Important notes on Serial ATA

ïIn a legacy operating system (DOS, Windows 98, Windows Me, Windows NT) environment, using the Serial ATA connectors will disable the ICHR chipset support to one of the IDE channels (either primary or secondary channel).

ïThe Serial ATA RAID feature (RAID 0,1) is available only if you are using WindowsÆ XP and WindowsÆ 2000.

ïHot plug support for Serial ATA drive and connections are not available in this motherboard.

ïInstall WindowsÆ XP Service Pack 1 when using Serial ATA.

2-26

Chapter 2: Hardware information