10.GAME/MIDI connector (16-1 pin GAME)

This connector supports a GAME/MIDI module. If a GAME/MIDI module is available, connect the GAME/MIDI cable to this connector. The GAME/MIDI port on the module connects a joystick or a game pad for playing games, and MIDI devices for playing or editing audio files.

+5V J1B2 J1CY GND GND J1CX J1B1 +5V

P4P800-E

GAME

P4P800-E Game Connector

MIDI_IN J2B2 J2CY MIDI_OUT J2CX J2B1 +5V

11.Chassis intrusion connector (4-1 pin CHASSIS)

This lead is for a chassis designed with intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event.

By default, the pins labeled ìChassis Signalî and ìGroundî are shorted with a jumper cap. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins.

CHASSIS1

+5VSB MB

Chassis Signal GND

P4P800 SE

(Default)

P4P800 SE Chassis Alarm Lead

2-32

Chapter 2: Hardware information