3.Use the up or down arrow keys to select a drive, then press <Enter>. Follow succeeding screen instructions.

4.Press <Esc> to exit.

Viewing your RAID configuration

This option allows you to view your RAID configuration. You can also enable or disable the Auto-rebuild function in this section.

To view your RAID configuration:

1.From the IT8212 Setup Utility screen, press <5>. The following screen appears.

IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.

 

 

 

 

 

[ RAID Card Configuration ]

 

 

 

 

 

 

Auto-Rebuild:

 

 

 

 

Enable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[ RAID Card Resource ]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Channel 0

Interrupt: B

 

I/P Port: 0000AC00

 

 

 

 

Channel 1

Interrupt: B

 

I/P Port: 0000A800

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[ Drive Status ]

 

 

 

 

 

 

 

Channel

 

 

 

 

 

 

 

 

Size

 

Drive

 

 

 

 

 

 

 

 

 

 

 

 

ID

Drive Name

 

 

 

 

 

 

 

(MB)

Array No

Mode

 

Pri/D0

XXXXXXXXXXXXXX

 

 

 

XXXXXX

Array 0

U5

 

Pri/D1

XXXXXXXXXXXXXX

 

 

 

XXXXXX

Array 0

U2

 

Sec/D0

XXXXXXXXXXXXXX

 

 

 

XXXXXX

Array 0

U4

 

Sec/D1

XXXXXXXXXXXXXX

 

 

 

XXXXXX

Array 0

U6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

∗

: Capacity (GB)

 

 

 

 

Drive Mode: P = PIO, D = DMA, U = UDMA

 

[→

,← ,Space] Change Option

 

 

 

 

 

 

[ESC] Exit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.Use the left or right keys or the space bar enable or disable the Auto-rebuilditem.

4.Press <Esc> to exit.

5 - 28

Chapter 5: Software support