2.Press the load lever with your thumb (A) and move it to the left (B) until it is released from the retention tab.
Retention tab | Pn P Cap |
A
Loa d lever
B
This side of the cam box should face you.
To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU.
3. Lift the load lever in the direction of the arrow to a 135º angle.
4. Lift the load plate with your
thumb and forefinger to a 100º | B | |
angle (A), then push the PnP cap | ||
| ||
from the load plate window to |
| |
remove (B). | A | |
|
Loa d plate
5.Position the CPU over the socket, making sure that the gold triangle is on the
Alignment key
Gold triangle mark 
2 - 8 | Chapter 2: Hardware information |