5.6Creating a RAID driver disk

A floppy disk with the RAID driver is required when installing Windows® 2000/XP operating system on a hard disk drive that is included in a RAID set.

To create a RAID driver disk:

1.Place the motherboard support CD into the CD-ROM drive.

2.When the Drivers menu appears, select the RAID driver disk you want to create:

•Click Make ITE8212 Driver to create an ITE® 8212F RAID driver disk.

Or

Browse the contents of the support CD to locate the driver disk utility.

•Go to \Drivers\ITE8212\Makedisk.exe for the ITE® 8212F RAID driver disk utility

•Go to \Drivers\Chipset\Intel\IAA\F6 Install Floppy\F6flpy32 for the Intel® RAID driver disk utility

Refer to section “5.2.2 Drivers menu” for details.

4.Insert floppy disk to floppy disk drive.

5.Follow succeeding screen information to complete process.

6.Write-protect the floppy disk to avoid computer virus infection.

To install the RAID driver:

1.During the OS installation, the system prompts you to press the F6 key to install third-party SCSI or RAID driver.

2.Press <F6> then insert the floppy disk with RAID driver into the floppy disk drive.

3.Follow the succeeding screen instructions to complete the installation.

ASUS P5GD2

5 - 29