4.6.5Boot Settings Configuration

Phoenix-AwardBIOS CMOS Setup Utility

Boot

 

Boot

Settings Configuration

Select Menu

 

 

 

 

 

Case Open Warning

[Enabled]

Item Specific Help

 

Quick Boot

 

[Enabled]

 

 

Boot Up Floppy Seek

[Disabled]

Press [Enter] to

 

Bootup Num-Lock

[On]

enable or disable.

 

Typematic Rate Setting

[Disabled]

 

x

Typematic Rate (Chars/Sec) 6

 

x

Typematic Delay (Msec)

250

 

 

OS Select For DRAM > 64MB

[Non-OS2]

 

 

Full Screen LOGO

[Enabled]

 

 

Halt On

 

[All Errors]

 

 

 

 

 

 

F1:Help

↑↓� : Select Item

-/+:

Change

Value

F5: Setup

Defaults

ESC: Exit

→←: Select Menu

Enter:

Select

Sub-menu

F10: Save

and Exit

Case Open Warning [Enabled]

Enables or disables the chassis open status feature. Setting to Enabled, clears the chassis open status. Refer to section “2.7.2 Internal connectors” for setting details. Configuration options: [Disabled] [Enabled]

Quick Boot [Enabled]

Allows you to enable or disable the system quick boot feature. When Enabled, the system skips certain tests while booting.

Configuration options: [Disabled] [Enabled]

Boot Up Floppy Seek [Disabled]

Enables or disables the chassis open status feature. Setting to Enabled, clears the chassis open status. Configuration options: [Disabled] [Enabled]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock.

Configuration options: [Off] [On]

Typematic Rate Setting [Disabled]

Allows you to set the keystroke rate. Enable this item to configure the Typematic Rate (Chars/Sec) and the Typematic Delay (Msec).

Configuration options: [Disabled] [Enabled]

The items Typematic Rate (Chars/Sec) and Typematic Delay (Msec) become user-configurable only when the item Typematic Rate Setting is enabled.

Typematic Rate (Chars/Sec) [6]

Allows you to select the rate at which a character repeats when you hold a key. Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]

ASUS P5N-D

4-37