A new set of navigation keys is displayed on the bottom of the screen.

2.Press <R> to rebuild a RAID array. The following screen appears.

 

 

 

Array 1 : NVIDIA MIRROR

XXX.XXG

 

 

 

 

 

- Select Disk Inside Array -

 

 

 

RAID Mode: Mirroring

 

 

 

 

 

 

Striping Width:

1

 

Striping Block: 64K

 

 

 

Adapt

Channel

M/S

Index

Disk Model Name

Capacity

 

 

 

 

 

 

 

 

 

2

1

Master

0

XXXXXXXXXXXXXXXXX

XXX.XXGB

 

 

1

0

Master

1

XXXXXXXXXXXXXXXXX

XXX.XXGB

 

 

 

 

[↑↓�] Select [F6] Back

[F7] Finish

 

 

 

 

 

 

 

 

 

 

 

3.Use the up or down arrow keys to select a RAID array to rebuild, then press <F7>. The following confirmation message appears.

Rebuild array?

[ENTER] OK [ESC] Cancel

4.Press <Enter> to start rebuilding array or press <Esc> to cancel.

5.After the rebuild process, the Array list menu appears.

You will need to enter Window® XP and run the NVIDIA utility in order to complete the rebuilt process.

5-34

Chapter 5: Software support