Right-angle side

Connect the right-angle side of SATA signal cable to the SATA device, or connect the right‑angle side of the SATA cable to the onboard SATA port to avoid mechanical conflict with huge graphics cards.

4.USB connectors (10-1 pin USB56, USB78)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.

P5N-D

P5N-D USB 2.0 connectors

USB56

_USB_USBGNDNC USB+5VP6 -P6+

PIN1 USB+5V-P5+GND P5_USB_USB

USB78

_USB_USBGNDNC USB+5VP8 -P8+

PIN1 USB+5V-P7+GND P7_USB_USB

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

You can connect the USB cable to ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB connector onboard.

ASUS P5N-D

2-29