Creating a RAID 0 or RAID 1 set
To create a RAID set:
1.From the utility menu bar, select RAID > Create array.
Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd.
[Selection] | [Controller] | [ Devices ] | [ RAID ] |
|
|
| RAID Config |
|
|
| Create array |
|
|
| Delete array |
|
|
| Spare Management |
ENTER/SPACE:Select, ESC:Back/Exit
2.Press <Enter>. The screen shows the disks you can add to make up the RAID set. Use the arrow key to select a disk and press <Enter> or <Space> to include this disk in the array.
Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd.
[Selection] [Controller] [ Devices ] [ RAID ]
RAID Config
Select free disks to create |
|
|
|
| ||
ID Port | Disk Name | Size | Max Speed | Status | ||
0 | 0 | SAS : ST336754SS | 36.6GB | SAS | 3.0 | FREE |
1 | 1 | SAS : ST336754SS | 36.6GB | SAS | 3.0 | FREE |
NEXT |
|
|
|
|
| |
|
|
|
|
|
|
|
ENTER/SPACE:Select, ESC:Back/Exit
3.After you have selected the desired disks, select NEXT to create array.
Chapter 5: Software support |