4.Marvell® 88SE6320 SAS RAID connectors [yellow] (7-pin SAS1-2)

These connectors are for SAS (Serial Attached SCSI) signal cables that support SAS hard disk drives. To configure RAID 0 or RAID 1, install two SAS hard disk drives to these two connectors.

P5N64 WS PRO

SAS1 SAS2

GND

 

 

 

 

GND

RSATA_TXP1

 

 

 

 

RSATA_TXP2

RSATA_TXN1

 

 

 

 

RSATA_TXN2

GND

 

 

 

 

GND

RSATA_RXP1

 

 

 

 

RSATA_RXP2

RSATA_RXN1

 

 

 

 

RSATA_RXN2

GND

 

 

 

 

GND

P5N64 WS Professional SAS connectors

• Please install the Marvell® Controller driver before using the yellow SAS RAID connectors (SAS1-2). Refer to 5.2.4 Make Disk menu for details.

•Before creating a RAID set, refer to 5.4.4 Marvell® SAS RAID configurations or the manual bundled in the motherboard support DVD.

Before creating a RAID set using SAS hard disk drives, make sure that you have connected the SAS signal cables and installed SAS hard disk drives; otherwise, you cannot enter the Marvell RAID utility and SAS BIOS setup during POST.

ASUS P5N64 WS Professional

2-27