LDT Spread Spectrum [Center Spread]

Disables or sets the Lightning Data Transport (LDT) clock generator spread spectrum. The default setting [Center Spread] allows a dynamic LDT frequency change of -0.25% to +0.25%. Configuration options: [Disabled] [Center Spread]

Voltage Control

This sub-menu allows you to set the system operating voltages. Set the Overclock Profile to [Manual], if you want to configure this item.

Phoenix-Award BIOS CMOS Setup Utility

Advanced

Voltage Control

Select Menu

 

 

 

 

DRAM Voltage

[

Auto]

Item Specific Help

Chipset Core Voltage

[+1.4V]

 

South Bridge SATA Voltage

[+1.5V]

Press [Enter] to set.

CPU Termination Voltage

[1.25V]

 

VCore Overvoltage 100mv

[Disabled]

 

VCore Voltage

[Auto]

 

 

 

 

 

F1:Help

↑↓

: Select Item

-/+:

Change

Value

F5: Setup Defaults

ESC: Exit

→←

: Select Menu

Enter:

Select

Sub-menu

F10: Save and Exit

 

 

 

 

 

 

 

DDR2 Voltage [Auto]

Allows you to set the DDR2 operating voltage. Set to Auto for safe mode. Configuration options: [Auto] [+1.80V] [+1.85V] [+1.90V] [+1.95] [+2.00V] [+2.05V] [+2.10V] [+2.15V]

Refer to the DDR2 documentation before setting the memory voltage. Setting a very high memory voltage may damage the memory module(s)!

Chipset Core Voltage [+1.4V]

Allows you to set the chipset core voltage.

Configuration options: [+1.4V] [+1.5V]

South Bridge SATA Voltage [+1.5V]

Allows you to set the South Bridge SATA voltage.

Configuration options: [+1.5V] [+1.6V]

ASUS P5ND2-SLI Series

4 - 25